Janko Slavič's home page at Laboratory for Dynamics of Machines and Structures
Janko Slavič
Contact
Professor
Janko Slavič, PhD
  Ladisk, Faculty of Mechanical Engineering, University of Ljubljana
  janko.slavic@fs.uni-lj.si
  +386 1 4771 226 jankoslavic     jankoslavic    
93 Application of thermoelasticity in the frequency-domain multiaxial vibration-fatigue criterion
J. Šonc,
K. Zaletelj and
J. Slavič
Mechanical Systems and Signal Processing, 2024
91 Self-aware active metamaterial cell 3D-printed in a single process
T. Košir,
M. Zupan and
J. Slavič
International Journal of Mechanical Sciences, 2024
89 Single-pixel optical-flow-based experimental modal analysis
I. Tomac,
J. Slavič and
D. Gorjup
Mechanical Systems and Signal Processing, Volume 202, November 2023, 110686
88 Strain Experimental Modal Analysis of an Euler-Bernoulli Beam Based on the Thermoelastic Principle
K. Zaletelj,
J. Slavič,
J. Šonc and
M. Boltežar
Mechanical systems and signal processing, 2023
87 Manufacturing of single-process 3D-printed piezoelectric sensors with electromagnetic protection using thermoplastic material extrusion
T. Košir and
J. Slavič
Additive Manufacturing, 2023
86 Simultaneous Non-Contact Identification of the Elastic Modulus, Damping and Coefficient of Thermal Expansion in 3D-Printed Structures
G. Krivic and
J. Slavič
Polymer Testing, 2023
85 Morlet-wave-based modal identification in the time domain
I. Tomac and
J. Slavič
Mechanical Systems and Signal Processing, Volume 192, June 2023, 110243
84 Accelerated vibration-fatigue characterization for 3D-printed structures: Application to fused-filament-fabricated PLA samples
M. Česnik,
J. Slavič and
M. Boltežar
International Journal of Fatigue, Volume 171, June 2023
83 Vibration fatigue by spectral methods-A review with open-source support
A. Zorman,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Volume 190, 1 May 2023, 2023
82 Design principles for a single-process 3D-printed stacked dielectric actuators — Theory and experiment
T. Barši Palmić and
J. Slavič
International Journal of Mechanical Sciences, 2023
81 Modeling of single-process 3D-printed piezoelectric sensors with resistive electrodes: the low-pass filtering effect
T. Košir and
J. Slavič
Polymers, 2023
80 Multi-Level Curvature-Based Parametrization and Model Updating Using a 3D Full-Field Response
K. Zaletelj,
D. Gorjup,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, 2023
76 Damping identification based on a high-speed camera
I. Tomac and
J. Slavič
Mechanical Systems and Signal Processing, Volume 166, March 2022, 108485
75 Single-process 3D-printed structures with vibration durability self-awareness
M. Palmieri,
J. Slavič and
F. Cianetti
Additive Manufacturing, Volume 47, 2021
74 Full-field DIC-based model updating for localized parameter identification
K. Zaletelj,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Vol. 164, p. 108287, February 2022
73 Laser-Light Speckle Formation for Deflection-Shape Identification Using Digital Image Correlation
K. Zaletelj,
V. Agrež,
J. Slavič,
R. Petkovšek and
M. Boltežar
Mechanical Systems and Signal Processing, Vol. 161, p. 107899, December 2021
72 Short-time Fatigue-Life Estimation for Non-Stationary Processes Considering Structural Dynamics
A. Zorman,
J. Slavič and
M. Boltežar
International Journal of Fatigue, 2021
71 Design principles for a single-process 3d-printed accelerometer – theory and experiment
M. Arh,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Vol. 152, p. 107475, May 2021
70 Still-camera multiview Spectral Optical Flow Imaging for 3D operating-deflection-shape identification
D. Gorjup,
J. Slavič,
A. Babnik and
M. Boltežar
Mechanical Systems and Signal Processing, Vol. 152, p. 107456, May 2021
69 Full-field FRF estimation from noisy high-speed-camera data using a dynamic substructuring approach
T. Bregar,
K. Zaletelj,
G. Čepon,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, 2020
68 Experimental Identification of the Dynamic Piezoresistivity of Fused-Filament-Fabricated Structures
M. Arh,
J. Slavič and
M. Boltežar
Additive Manufacturing, 36:101493, December 2020
67 Process parameters for FFF 3D-printed conductors for applications in sensors
T. Barši Palmić,
J. Slavič and
M. Boltežar
Sensors (2020), 20(16), 4542
66 Strain proportional damping in Bernoulli-Euler beam theory
D. Lisitano,
J. Slavič,
E. Bonisoli and
M. Boltežar
Mechanical Systems and Signal Processing (2020)
64 SciPy 1.0: fundamental algorithms for scientific computing in Python
P. Virtanen,
R. Gommers,
TE Oliphant and
J. Slavič
et al.
Nature Methods (2020)
63 Harmonic Equivalence of the Impulse Loads in Vibration Fatigue
P. Ogrinec,
J. Slavič and
M. Boltežar
Journal of Mechanical Engineering 65(2019)11-12, 631-640
62 Frequency domain triangulation for full-field 3D operating-deflection-shape identification
D. Gorjup,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Vol. 133, p. 106287, August 2019
61 Structure-Borne Noise at PWM Excitation Using an Extended Field Reconstruction Method and Modal Decomposition
J. Luznar,
J. Slavič and
M. Boltežar
Strojniški vestnik - Journal of Mechanical Engineering 65(2019)9, 471-481, August 2019
60 Dynamic Measurements Using FDM 3D-Printed Embedded Strain Sensors
M. Maurizi,
J. Slavič,
F. Cianetti,
M. Jerman,
J. Valentinčič,
A. Lebar and
M. Boltežar
Sensors, Volume 19, June 12 2019, Article #2661
59 Vibration fatigue at half-sine impulse excitation in the time and frequency domains
P. Ogrinec,
J. Slavič,
M. Česnik and
M. Boltežar
International Journal of Fatigue, Volume 123, June 2019, Pages 308-317
58 Experimental Modal Analysis on Full-Field DSLR Camera Footage Using Spectral Optical Flow Imaging
J. Javh,
J. Slavič and
M. Boltežar
Journal of Sound and Vibration, Volume 434, 2018, Pages 213-220
57 A review of continuous contact-force models in multibody dynamics
L. Skrinjar,
J. Slavič and
M. Boltežar
International Journal of Mechanical Sciences. Volume 145, September 2018, Pages 171-187
56 Experimental research on structure-borne noise at pulse-width-modulation excitation
J. Luznar,
J. Slavič and
M. Boltežar
Applied Acoustics, Volume 137, August 2018, Pages 33-39
55 Wear Rate vs Dynamic and Material Properties at Elevated Temperatures for a Copper-Graphite Brush
A. Turel,
J. Slavič and
M. Boltežar
Journal of Mechanical Engineering, Volume 64 (3), February 2018, Pages 169-175
54 Measuring full-field displacement spectral components using photographs taken with a DSLR camera via an analogue Fourier integral
J. Javh,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Vol. 100, p. 17-27, Feb 2018
53 Vibration fatigue using modal decomposition
M. Mršnik,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Vol. 98, p. 548-556, Jan 2018
52 High frequency modal identification on noisy high-speed camera data
J. Javh,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Vol. 98, p. 344-351, Jan 2018
51 Non-Stationarity Index in Vibration Fatigue: Theoretical and Experimental Research
L. Capponi,
M. Česnik,
J. Slavič,
F. Cianetti and
M. Boltežar
International Journal of Fatigue, Volume 104, November 2017, Pages 221-230
50 The importance of harmonic versus random excitation for a human finger
J. Slavič,
L. Knez and
M. Boltežar
International Journal of Mechanical Sciences, Vol. 131-132, p. 507-515, Oct 2017
49 A Sequential Approach to the Biodynamic Modeling of a Human Finger
L. Knez,
J. Slavič and
M. Boltežar
Shock and Vibration, Vol. 2017, Article ID8791406, Aug 2017
48 Absolute Nodal Coordinate Formulation in a Pre-Stressed Large-Displacements Dynamical System
L. Skrinjar,
J. Slavič and
M. Boltežar
Journal of Mechanical Engineering, Vol. 63, p. 417-425, Jul 2017
46 The effort of the dynamic simulation on the fatigue damage evaluation of flexible mechanical systems loaded by non-Gaussian and non stationary loads
F. Cianetti,
M. Palmieri,
J. Slavič,
C. Braccesi and
G. Morettini
International Journal of Fatigue, Volume 103, October 2017, Pages 60–72
44 Electrical contact resistance and wear of a dynamically excited metal-graphite brush
A. Turel,
J. Slavič and
M. Boltežar
Advances in Mechanical Engineering (2017), Vol. 9, Num. 3, p. 1-8
42 The Subpixel Resolution of Optical-Flow-Based Modal Analysis
J. Javh,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Vol. 88, p. 89–99, May 2017
41 Design of damping layout using spatial-damping identification methods
M. Brumat,
J. Slavič and
M. Boltežar
International Journal of Mechanical Sciences, Volume 127, July 2016, Pages 41-46
40 Assessment of the Fatigue Parameters from Random Vibration Testing: Application to a Rivet Joint
M. Česnik,
J. Slavič and
M. Boltežar
Journal of Mechanical Engineering, Volume 62, Issue 7-8, 2016, Pages 471-482
39 Synchrosqueezed Wavelet Transform for Damping Identification
M. Mihalec,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Volume 80, 1 December 2016, Pages 324-334
38 Spatial damping identification in the frequency domain - A Theoretical and Experimental Comparison
M. Brumat,
J. Slavič and
M. Boltežar
Journal of Sound and Vibration, 376:182 - 193, 2016
37 Multiaxial Vibration Fatigue - A Theoretical and Experimental Comparison
M. Mršnik,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Volumes 76–77, August 2016, Pages 409-423
36 Vibration-Fatigue Damage Accumulation for Structural Dynamics with Non-linearities
U. Proso,
J. Slavič and
M. Boltežar
International Journal of Mechanical Sciences 106 (2016): 72-77
35 Identification of Out-of-Plane Material Characteristics through Sheet-Metal Blanking
Š. Bolka,
J. Slavič and
M. Boltežar
Journal of Mechanical Engineering 61(2015)4, 217-226
34 Multiaxial Fatigue Criteria for Random Stress Response - Theoretical and Experimental Comparison
M. Mršnik,
J. Slavič and
M. Boltežar
Procedia Engineering, Volume 101, 2015, Pages 459-466
33 An interface force measurements-based substructure identification and an analysis of the uncertainty propagation
T.Kranjc,
J.Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Volumes 56–57, May 2015, Pages 2-14
32 A comparison of the strain and the classic experimental modal analysis
T. Kranjc,
J. Slavič and
M. Boltežar
Journal of Vibration and Control, published online 29 April 2014
31 Fatigue Damage for Sweep-Sine and Random Accelerated Vibration Testing
V. Pahor Kos,
J. Slavič and
M. Boltežar
Advances in Mechanical Engineering ID 340545
30 Minimization of the positional errors for an accurate determination of the kinematic parameters of a rigid-body system with miniature inertial sensors
J.Žumer,
J.Slavič and
M. Boltežar
Mechanism and Machine Theory, Volume 81, November 2014, Pages 193-208
29 Vibrational Fatigue and Structural Dynamics for Harmonic and Random Loads
M. Česnik and
J. Slavič
Journal of Mechanical Engineering, Volume 60, Issue 5, 2014, Pages 339-348
28 Tuned-Sinusoidal Method for the Operational Modal Analysis of Small and Light Structures
D. Rovšček,
J. Slavič and
M. Boltežar
Journal of Mechanical Engineering, Volume 60, Issues 3, 2014, Pages 187–194
27 A novel laboratory blanking apparatus for the experimental identification of blanking parameters
J. Slavič,
S. Bolka,
V. Bratuš and
M. Boltežar
Journal of Materials Processing Technology, Volume 214, Issue 2, February 2014, Pages 507-513
26 The mass normalisation of the displacement and strain mode shapes in a strain experimental modal analysis using the mass-change strategy
T. Kranjc,
J. Slavič and
M. Boltežar
Journal of Sound and Vibration, Volume 332, Issue 26, 23 December 2013, Pages 6968-6981
25 A Generalized Magnetostrictive-Forces Approach to the Computation of the Magnetostriction-Induced Vibration of Laminated Steel Structures
M. Javorski,
G. Čepon,
J. Slavič and
M. Boltežar
IEEE Transactions on Magnetics, Vol. 49, No. 11, November 2013
24 Frequency-based structural modification for the case of base excitation
M. Česnik,
J. Slavič,
P. Čermelj and
M. Boltežar
Journal of Sound and Vibration, Volume 332, Issue 20, 30 September 2013, Pages 5029–5039
23 Operational mode-shape normalisation with a structural modification for small and light structures
D. Rovšček,
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, Volume 42, Issues 1–2, January 2014, Pages 1–13
22 A Thick Anisotropic Plate Element in the Framework of an Absolute Nodal Coordinate Formulation
M.Langerholc,
J. Slavič and
M.Boltežar
Nonlinear Dynamics, July 2013, Volume 73, Issue 1-2, pp 183-198
21 Absolute Nodal Coordinates in Digital Image Correlation
M.Langerholc,
J. Slavič and
M.Boltežar
Experimental Mechanics, June 2013, Volume 53, Issue 5, pp 807-818
20 The use of strain sensors in an experimental modal analysis of small and light structures with free-free boundary conditions
D. Rovšček,
J. Slavič and
M. Boltežar
Journal of Vibration and Control, 2013, Volume 19, Issue 7, May 2013, Pages 1072-1079
19 A Multi-Axis Biodynamic Measuring Handle for a Human Hand-Arm System
L. Knez,
J. Slavič and
M. Boltežar
Journal of Mechanical Engineering, Volume 59, Issue 2, FEB 2013, Pages 71-80
18 Frequency-Domain Methods for a Vibration-Fatigue-Life Estimation - Application to Real Data
M. Mršnik,
J. Slavič and
M. Boltežar
International Journal of Fatigue, Vol. 47, p. 8-17, 2013
17 Frequency Characteristics of Magnetostriction in Electrical Steel Related to the Structural Vibrations
M. Javorski,
J. Slavič and
M. Boltežar
IEEE Transactions on Magnetics, Vol. 48, Issue 12, December 2012, Pages 4727–4734
16 Uninterrupted and accelerated vibrational fatigue testing with simultaneous monitoring of the natural frequency and damping
M.Česnik,
J. Slavič and
M.Boltežar
Journal of Sound and Vibration, Vol. 331, Issue 24, 19 November 2012, Pages 5370–5382
15 Experimental validation of a complex, large-scale, rigid-body mechanism
M.Langerholc,
M.Česnik,
J. Slavič and
M.Boltežar
Engineering Structures, March 2012 vol. 36, Pages 220-227
14 Development of a liquid-flow pulsator
A.Svete,
J.Kutin,
I.Bajsić and
J. Slavič
Flow Measurement and Instrumentation, Vol 23, Issue 1, Mar 2012, Pages 1–8
13 Typical bearing-fault rating using force measurements: application to real data
J. Slavič,
A. Brković and
M. Boltežar
Journal of Vibration and Control, December 2011 vol. 17 no. 14 2164-2174
12 Damping identification with the Morlet-wave
J. Slavič and
M. Boltežar
Mechanical Systems and Signal Processing, 2011, Volume 25, Issue 5, July 2011, Pages 1632-1645
11 Spatial-mode-shape identification using a continuous wavelet transform
M. Česnik,
J. Slavič and
M. Boltežar
Journal of Mechanical Engineering, Volume 55, 5, May 2009, Pages 277-285
10 A new approach to roughness-induced vibrations on a slider
J. Slavič,
M.D. Bryant and
M. Boltežar
Journal of Sound and Vibration, Volume 306, Issues 3-5, 9 October 2007, Pages 732-750
9 Simulating Multibody Dynamics With Rough Contact Surfaces and Run-in Wear
J. Slavič and
M. Boltežar
Nonlinear Dynamics, Vol 45, Num 3-4, August 2006, 353 - 365
7 Measuring the dynamic forces to identify the friction of a graphite-copper contact for variable temperature and current
J. Slavič and
M. Boltežar
Wear, Vol 260, Issues 9-10, May 2006, 1136-1144
6 Non-linearity and non-smoothness in multi-body dynamics : application to woodpecker toy
J. Slavič and
M. Boltežar
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2006, vol 220, issue 3, 285-296
5 Modelling and analyzing the dynamics of an electric-motor brush
J. Slavič,
M. Nastran and
M. Boltežar
Journal of Mech Eng., 2006, vol 52, issue 2, 126-137
4 Enhancements to the continuous wavelet transform for damping identifications on short signals
M. Boltežar and
J. Slavič
Mechanical Systems and Signal Processing, Sep 2004, Volume 18, Issue 5, p. 1065-1076
3 Damping identification using a continuous wavelet transform: application to real data
J. Slavič,
I. Simonovski and
M. Boltežar
Journal of Sound and Vibration, Volume 262, Issue 2, 24 April 2003, Pages 291-307
2 Enhanced identification of damping using continuous wavelet transform
J. Slavič and
M. Boltežar
Journal of Mech Eng., 2002, Vol 48, Issue 11, 621-631
1 Measurement of the bending vibration frequencies of a rotating turbo wheel using an optical fibre reflective sensor
J. Slavič,
P. Čermelj,
A. Babnik,
J. Rejec,
J. Možina and
M. Boltežar
Measurement Science and Technology, 2002, vol. 13, 4, 477-482